Intermatic Outdoor Timer Hb35r Instructions

Intermatic Outdoor Timer HB35R Instructions

The Intermatic Outdoor Timer HB35R is a versatile and user-friendly device designed to automate the operation of outdoor lighting and appliances. With its intuitive design and comprehensive functionality, the HB35R offers a convenient and reliable way to control outdoor lighting schedules, ensuring convenience and energy savings. To help you get the most out of your HB35R timer, this guide will provide step-by-step instructions on its installation, programming, and operation.

Electrical Considerations

Before installing the HB35R, it is crucial to ensure electrical safety. The timer should be installed by a qualified electrician in accordance with all applicable electrical codes and regulations. Verify that the power source is compatible with the timer's voltage requirements and that the wiring is properly sized and rated for the intended load.

Installation

Mount the Timer:

Mount the HB35R on a flat surface using the included screws or a suitable mounting bracket. Ensure that the timer is level and securely fastened.

Connect the Wiring:

Connect the wires from the power source, load (outdoor lighting or appliance), and ground to the corresponding terminals on the timer. Tighten the terminal screws securely to ensure proper electrical connections.

Programming

Set the Current Time:

Press the "Clock" button and use the "+" or "-" buttons to adjust the hour and minute settings until the correct time is displayed. Confirm by pressing the "Clock" button again.

Set the ON Time:

To set the time when the device should turn on, press the "Program 1" button (or "Program 2" for a second program). Use the "+" or "-" buttons to adjust the hour and minute settings for the desired ON time.

Set the OFF Time:

Repeat the previous step to set the time when the device should turn off. Press the "Program 1" or "Program 2" button again to save the settings.

Set the RUN Mode:

Press the "Run" button to cycle through the available RUN modes: "AUTO" (timer operates based on programmed schedules), "ON" (load continuously powered), "OFF" (load continuously off), and "RANDOM" (randomized on/off times).

Operation

Manual Override:

To manually turn the load on or off without affecting the programmed schedule, press the "Override" button. The load will remain in the overridden state until the "Override" button is pressed again.

Temporary Adjustment:

To temporarily adjust the ON or OFF time, press and hold the "Clock" button while using the "+" or "-" buttons to make the desired changes. The timer will automatically revert to the programmed schedule at the next scheduled time change.

Reset:

To reset the timer to its factory default settings, press and hold the "Reset" button for approximately five seconds. All programmed settings will be erased.

Troubleshooting

If you encounter any issues with the HB35R timer, refer to the following troubleshooting tips:

No power:
Check if the power source is connected properly and if the circuit breaker or fuse is not tripped or blown.
Load not turning on:
Verify that the wiring is correct, the load is functioning properly, and the "RUN" mode is set to "AUTO" or "ON."
Timer not keeping time:
Replace the batteries (if applicable) or check if the power source is providing steady voltage.

Conclusion

The Intermatic Outdoor Timer HB35R is a reliable and easy-to-use tool for automating outdoor lighting and appliance operations. By following the instructions provided in this guide, you can ensure proper installation, programming, and operation of the timer, maximizing its benefits and convenience. With its versatile features and user-friendly design, the HB35R helps you create a well-controlled outdoor environment, enhancing both security and energy efficiency.