How To Replace An Outdoor Lamp Post Fixture

Outdoor lamp post fixtures are a great way to add light and style to your outdoor space. They can also be used to provide security and safety. If you're looking to replace an outdoor lamp post fixture, there are a few things you'll need to do.

Safety First

Before you start working on any electrical project, it's important to make sure that you have the proper safety gear. This includes gloves, safety glasses, and a hard hat. You should also make sure that the power to the lamp post is turned off before you begin.

Gather Your Tools

Once you have your safety gear, you'll need to gather your tools. You'll need a screwdriver, a wrench, and a wire cutter. You may also need a ladder if the lamp post is tall.

Remove the Old Fixture

To remove the old fixture, you'll need to start by unscrewing the screws that hold it in place. Once the screws are removed, you can carefully pull the fixture down. Be careful not to damage the wires.

Disconnect the Wires

Once the fixture is removed, you'll need to disconnect the wires. Be sure to note which wire goes to which terminal. You can do this by taking a picture or by making a diagram.

Install the New Fixture

To install the new fixture, you'll need to reverse the steps that you took to remove the old fixture. Start by connecting the wires to the terminals on the new fixture. Be sure to match the wires to the correct terminals. Once the wires are connected, you can screw the new fixture into place.

Turn on the Power

Once the new fixture is installed, you can turn on the power and test it. If the fixture is working properly, you're all done!

Tips

Here are a few tips to make the job easier:

If you're not comfortable working with electricity, it's best to hire a qualified electrician.
Be sure to use the correct size screwdriver and wrench. Using the wrong size can damage the screws or the fixture.
Be careful not to overtighten the screws. Overtightening can damage the fixture.
If you're replacing a fixture on a tall lamp post, be sure to use a ladder that is tall enough to reach the fixture safely.